Polymer Waterproof and Crack-Resistant Mortar

The product is available in two types (waterproofing and anti-cracking), offering high flexibility, high bonding strength, superior weather resistance, excellent waterproof and anti-crack performance, environmental friendliness, and ease of use.

Information

  • Net Weight: 25KG, 40KG

  • Model: Thin-layer, Thick-layer

Features

  • Low shrinkage: Effectively reduces cracks and fissures.

  • Strong adhesion: Active ingredients penetrate substrate pores to create a dense, crystalline waterproof layer.

Category:

Anti-crack layers for EPS/XPS boards and thermal insulation mortars. Waterproofing and leak repair for masonry and concrete. Ideal for underground seepage prevention projects.

  • Prep: Clean the substrate and inspect for defects.
  • Mixing: Mix 5.5-6kg water per 25kg bag, or 8.5-10kg water per 40kg bag, until smooth.
  • Thickness: Recommended layer is 3-10mm.

Complies with JC/T 984-2011 and JG/T 158-2013 standards.

Test ItemsTechnical Requirements
Impermeability Pressure≥ 1.5
Compressive Strength≥ 24
Flexural Strength≥ 8
Bond Strength≥ 1.0
Shrinkage Rate≥ 0.15
Water Absorption≥ 4
Test ItemsTechnical Requirements
Bond Strength to EPSOriginal Strength: ≥ 0.1 / After Water Immersion ≥ 0.1
Bond Strength to Cement MortarOriginal Strength ≥ 0.7 / After Water Immersion ≥ 0.5
Pot Life≥ 1.5
Compressive-Flexural Ratio≥ 3.0

NOTE

  • Pot Life: Use mixed mortar within 2 hours.
  • No Re-mixing: Never add water to hardened mortar.
  • Conditions: Do not use below 0° C or in damp, unventilated areas.
  • Compatibility: Do not mix with other mortars.
  • Storage: Store in a cool, dry place; shelf life 12 months.

It provides anti-crack protection for EPS/XPS insulation boards, waterproofing and leak repair for masonry and concrete, and is ideal for underground seepage prevention projects.

It is available in two types — Waterproofing and Anti-cracking — in 25KG or 40KG bags.

It achieves a bond strength to EPS of ≥0.1 Mpa, maintained even after water immersion, with active ingredients that penetrate substrate pores to form a dense, crystalline waterproof layer — making it a reliable choice for EPS/XPS insulation board coating.

It achieves an impermeability pressure rating of ≥1.5 Mpa under JC/T 984-2011/JG/T 158-2013 testing, along with water absorption ≥4 and a low shrinkage rate of ≥0.15, making it well suited for underground seepage control and waterproofing repair.

Compressive strength is ≥24 Mpa and flexural strength is ≥8 Mpa, with a compressive-to-flexural ratio of ≥3.0 and bond strength to cement mortar of ≥0.7 Mpa (≥0.5 Mpa after water immersion), giving it strong, weather-resistant durability.

Clean the substrate thoroughly and inspect it for defects before mixing and applying the mortar.

Mix approximately 5.5–6kg water per 25kg bag, or 8.5–10kg water per 40kg bag, until smooth. Recommended layer thickness is 3–10mm.

It complies with JC/T 984-2011 and JG/T 158-2013 standards for waterproof and anti-crack mortars.

No — do not use below 0°C or in damp, unventilated areas, and do not mix it with other mortars. Pot life is 2 hours after mixing; do not re-mix hardened mortar with water. Store in a cool, dry place; shelf life is 12 months.

Yes, we supply in bulk for waterproofing and underground engineering projects, with OEM/private-label packaging available. Contact us for a project quotation.

Related products