C2 CERAMIC TILE ADHESIVE 20kg

Super Strong Tile Adhesive. Eco-friendly, polymer-modified adhesive made with inorganic binders, premium fine aggregates, and imported additives.

Features

  • Flexible / Thermal resistance

  •  Hollowing & peeling resistant

  • Thin-layer / Time-saving

  • Strong bond / Water resistant

Category:

Indoor/outdoor public & wet areas (walls, floors, paper-faced tiles).

Sintered Stone: 1200 x 2400 mm

Vitrified Tile: 400 x 1200 mm

Glazed Tile: 400 x 800 mm

Floor Tile: 800 x 800 mm

Exterior Paper-faced: 45 x 125 mm

Substrate: Must be firm, flat, and clean.

Mixing: 20kg powder to ~5kg water (adjust as needed).)

Stirring: Add powder to water; mix until a smooth, lump-free paste. Let stand for minutes, restir, and use.

Application: * Apply with notched trowel (~1m² per area)

Press and align tiles (spacers recommended).

Clean and grout 24h after tiling

Complies with JC/T 547-2017 “Ceramic Tile Adhesive” C2 technical requirements.

Test ItemsStrength (Mpa)TS (Indoor I) II Type
Initial AdhesionStrength≥1.0
Water ResistanceStrength≥1.0
Heat ResistanceStrength≥1.0
Freeze-ThawStrength≥1.0
Open Time (OT 20Min)Strength≥0.5

NOTE

  • Tip: Remove skin if the paste surface dries; never remix hardened paste with water.
  • Environment: Use between 5°C and 40°C.
  • Safety: Contains alkali; wear gloves to protect skin and eyes.
  • Transport: Keep dry, avoid sun, and ensure intact packaging.
  • Storage: Store in a cool, dry place (> 0°C).
  • Shelf Life: 12 months.

It is a super-strong, eco-friendly polymer-modified adhesive for indoor/outdoor public and wet areas, including walls, floors, and paper-faced tiles.

Yes. C2 is rated for both indoor and outdoor public and wet areas, and its higher freeze-thaw resistance makes it the preferred choice among our tile adhesives for demanding exterior projects.

C1 supports tiles up to 800 x 800 mm with a freeze-thaw strength of ≥0.5 Mpa. C2 is our super-strong grade, supporting large-format sintered stone and vitrified tiles up to 1200 x 2400 mm, with a higher freeze-thaw strength of ≥1.0 Mpa for more demanding installations.

It supports large-format tiles including sintered stone up to 1200 x 2400 mm, vitrified tiles up to 400 x 1200 mm, glazed tiles up to 400 x 800 mm, and floor tiles up to 800 x 800 mm.

Yes, C2 is suitable for exterior paper-faced mosaic tiles as small as 45 x 125 mm, in addition to large-format sintered stone, vitrified, glazed, and floor tiles.

It meets a freeze-thaw bond strength of ≥1.0 Mpa under JC/T 547-2017 testing — double the requirement for our C1 grade — giving it strong durability for outdoor and cold-climate tiling.

It complies with JC/T 547-2017 “Ceramic Tile Adhesive,” meeting C2 technical requirements (higher bond strength than C1/C0).

Mix approximately 20kg of powder with about 5kg of water, adjusting as needed until a smooth, lump-free paste forms.

The product contains alkali — wear gloves during use. Store in a cool, dry place above 0°C; shelf life is 12 months.

Yes, we supply in bulk for wholesale and project buyers, with OEM/private-label packaging available on request.

Related products